2-5
Basic Operation
Soft Value Editing
... press Value to
In Program mode...
The MPX 1 offers access to the most useful parameters of any program without
having to enter a separate Edit mode. These parameters are available from
Program mode in a "Soft Row" which is accessed by pressing Value.
From Program mode, simply press Value to display one of the Soft Row
parameters of the currently loaded program.
The upper line of the display will show the Effect type, the parameter name and
the current parameter value. The lower line of the display will show the name of
the program. Use the knob to change the parameter value. Use the < and >
buttons to move back and forth between the available parameters. A scroll
indicator in the lower left corner of the display tells you whether or not there are
more parameters in either direction.
Changes you make to parameters in the Soft Row will be saved only until you
load another program unless you store your modified version of the program.
See Program Store later in this section.
With Program and Value lit, MPX 1 Soft Row
parameters will be displayed. The Effect type and
the parameter name will appear on the upper line.
The Program name appears on the bottom line,
along with scroll indicators (< and >) that point you
in the direction of additional screens.
Ptch Vol-L
100%
> MPX Blue
The parameter value will flash in the upper
right. Use the knob to change the param-
eter value, use < and > to select another
parameter screen.
access the Soft Row – a
set of the most useful parameters
for each program.
