Lexicon MC-12HD, User Manual

Page: 41 / 214

MC-12HD
Basic Operation
2-29
5.1-channel Dolby Digital source recorded without Dolby Digital
Surround EX encoding is detected. The MC-12HD cannot automat-
ically detect Dolby Digital Surround EX encoding in non-flagged
input sources.
HDCP STATUS
ACTIVE, INACTIVE, ERROR
Indicates the current HDCP status of the media present at the active
HDMI input.
HDMI CONNECTOR
1-6
Indicates the HDMI connector selected as the active HDMI input.
INPUT
Indicates the selected input (for example, DVD1).
INPUT TYPE
ANLG, BYP, PCM, MIC, ---
Indicates the input source that is present. When the parameter
setting is ANLG, a 2-channel analog audio source is present and the
ADVANCED menu 2-CH ANLG BYP parameter is set to OFF. When
the parameter setting is BYP (Bypass), a 2-channel analog audio
source is present and the 2-CH ANLG BYP parameter is set to ON.
When the parameter setting is PCM, a 2-channel digital audio
source is present. When the parameter setting is MIC, a micro-
phone source is present. When the parameter setting is ---, an
unknown digital audio source is present.
MIX ROOM
SMALL, LARGE
Indicates the size of the mixing room that was used during the mixing
process. When the parameter setting is LARGE, you should set the
RE-EQUALIZATION parameter to ON for THX listening modes.
MODE
Indicates the activated listening mode (e.g., L7 FILM).
SAMPLE RATE
44.1kHz, 48kHz, 88.2kHz, 96kHz
Indicates the sample rate of the input source that is present.
SURR MIX LVL
+0.0dB, -3.0dB, -6.0dB
Indicates the relative surround channel level that was used during
the mixing process.
VERT RATE
60Hz, 50Hz, 59.94Hz ---
Indicates the vertical timing rate for the active video format being
carried on HDMI.
VID FMT
720P, 1080I, ---
Indicates the active video format of the media present at the active
HDMI input.
WORD LENGTH
16 bits, 20 bits, 24 bits
Indicates the word length of the audio data present in the input signal.