Lexicon LXP-5 Owner'S Manual Download

Page: 7 / 69

1-2

LXP-5 Owner's Manual

Adjust
Used to adjust program
parameter(s), or to ad-
just the selected pa-
rameter in Edit Mode.

LXP-5 Front Panel Controls

Input
Sets the audio input
level.

BYPASS

SELECT

LXP-5

LEARN

exicon

EDIT

PRESET

USER

INPUT

MIX

OUTPUT

PITCH

DELAY

CHORUS

MULTI

Output
Controls the signal
level sent to the LXP-5
outputs.

Mix
Controls the ratio of dry
(source) to wet (effect)
signal present at the
LXP-5 outputs. (Turn
the control all the way
to the left for 100% dry/
0% wet.)

Level Indicators
The left LED indicates
signal present; the right
flashes red when the
signal is -3dB from
peak overload.

Function and Select
Used for selection of
factory presets, User
memories, Bypass and
three edit modes.

Learn LED
Confirms that power is
on, and blinks in red or
green at different rates
to indicate LXP-5 sta-
tus.

Learn
This button is used to
store and edit pro-
grams, to learn
patches and, with an
external MIDI device,
to select MIDI channel.

Summary of Contents for LXP-5






































































Search results

Summary of Contents for LXP-5

Reviews:

Related manuals for LXP-5

Brands by name

Popular brands

Lexicon LXP-5, Owner'S Manual

Search results

Summary of Contents for LXP-5

Reviews:

Related manuals for LXP-5

Brands by name

Popular brands