17
CP-3
PLUS
Digital Surround Processor
Video Connections
The CP-3
PLUS
has three video inputs and one video output. The inputs are
labeled VIDEO IN 1, 2, and 3, and are switched along with audio inputs 1,
2, and 3 via the front panel or either remote. (Audio Input 4 will use the video
signal from Video Input 1.) These inputs are designed for standard NTSC
composite video signals such as those found at the outputs of video disc
players and VCRs.
If the CP-3
PLUS
is turned off via remote or front panel, the last selected video
input will continue to be fed to the output (the audio will be muted), so the
CP-3
PLUS
need not be left on, for example, for simple TV viewing. If the
master power switch on the CP-3
PLUS
rear panel is turned off, or if power is
removed from the CP-3
PLUS
, the unit will default to Input 1 for audio and
video, and will continue to pass that signal through to the output.
Connection
NOTE: The CP-3
PLUS
video inputs are designed for NTSC "M" composite
video signals. The video circuitry is capable of overlaying text on the
incoming video signal; it is also capable of generating its own blue text
background in the absence of an incoming video signal. Even though the
video circuitry is designed for NTSC only, it can synchronize to incoming
PAL and SECAM composite video signals and overlay text on the picture.
In doing this, however, the text will lose sharpness, especially in SECAM.
