background image

Copyright © Lexibook 2002 

6

English

Installing the SM1100 main unit and the wireless remote unit.

1.  The transmission range from the remote unit to the main unit is in the region

of 23-30 m (in an open space). These figures may vary with the environment and the
level of interference.

2.  The main unit and the remote unit should be located a minimum of 2 metres away

from any source of interference.

3.  Do not place the units close to a metal window frame.
4.  Any electrical device in the vicinity using a radio frequency of 434 MHz may cause

interference.

5.  Extremes of temperature may also reduce the transmission range. If the

temperature falls very low (below -25°C or -13°F) for a long period, transmission
power will be too low because of the alkaline batteries. In these conditions, keep the
remote unit indoors and wait for the temperature to rise again.

SETTING THE CLOCK

MAIN UNIT
1. Channel 

button.

2.  Alarm, AM/PM, °C/°F button.
3. Mode/snooze 

button.

4.  Up / hour / max button.
5.  Down / minute / min button.
6. Base.
10. Forecast details.

REMOTE UNIT
7. SET 

button.

8. RESET 

button.

9. Battery 

compartment.

1. Press 

the 

Mode button and keep it down until the hour starts to flash.

2. Press 

the 

Hour button as many times as necessary to select the correct hour.

3. Press 

the 

Minute button as many times as necessary to select the correct minute.

SM1102 English  7/2/04  4:21 PM  Page 6

Summary of Contents for SM1100













Reviews: