6
7
Additional settings in clock setting mode:
• Press to toggle between 1 and hour display.
• Press to toggle between RCC on and off.
Selecting the time-zone and clock display language
1. In clock mode, press and hold for seconds to enter time-zone and language setting mode.
. The currently selected language is blinking. Press or to select one of the 6 following languages:
French(
FRA
), English(
ENG
), Spanish(
ESP
), Portuguese(
POR
), Italian(
ITA
), German(
DEU
)
3. Press to confirm and return to clock mode. The clock will automatically start to scan the for the RCC signal.
Note:
the time zone is automatically updated when you choose a language.
Alarm modes
Discovering the 3 alarm modes
Serenity
®
Clock includes alarm modes. Press to toggle between the types of alarm display:
Polyphonic Ringtones Alarm
Radio Alarm
Awakening Mode
Setting the slarm time
1. Press and hold for seconds. The display shows the current alarm time, and the hour is blinking.
2. Press and to set the hour and confirm with .
3. The minutes are blinking. Press and to set the minutes and confirm with .
Press and hold for seconds while in clock mode. Press times.
The snooze icon flashes. You can set the time before the clock repeats the snooze alarm between 5 and 12 minutes
(DUR 05 - 12). Press and to set the minutes and confirm with .
Setting the duration for the snooze
Serenity
®
Clock is designed to automatically synchronize its calendar clock once it is brought within the reception range of the UK
atomic clock MSF signal, for GMT 0 (UK, Ireland, Portugal)
1. Make sure the correct time-zone is selected as described under ‘Selecting the time-zone and clock display language’ on page 18.
. The clock automatically starts scanning the RCC signal after it is powered on and the Radio Tower symbol starts to blink
See (Fig. E, 4).
Once data is being received the reception ring icons start to blink. A complete reception generally takes several
minutes, depending on the strength of the radio signal. Previous settings will be overwritten.
. When the reception is complete, the radio clock symbol will stop blinking and remain solid. The clock automatically scans the
time signal at 0:00 everyday to maintain accurate timing.
Notes:
• If the reception was successful the Radio Tower symbol and the rings are displayed. If the reception was not successful, but the
previous scan obtained a complete set of data then the Radio Tower symbol and the rings are shown as well. If there is no
reception for successive days then the RCC icon will be turned off.
• The clock will start to scan the RCC signal after every day at :00 am, after reset or reconnection to power (if used without back up
batteries) and when the time-zone is set.
• For an optimal reception, place the clock away from metal objects and electrical appliances (i.e. television, computer, monitor, etc.)
to minimize interference.
• Set the RCC switch to the sender that is closer to your position or which provides a better reception.
• Make sure you select the time-zone of the country of which you want to display the time.
Radio Controlled Clock
Setting the clock manually
1. To enter the clock setting mode, press and hold for seconds while in clock mode.
2. The hour is blinking. Press or to set the hour. Confirm with .
3. The minutes are blinking. Press or to set the minutes. Confirm with .
4. The day is blinking. Press or to set the day. Confirm with .
5. The month is blinking. Press or to set the month. Confirm with .
6. The year is blinking. Press or to set the year. Press to confirm all your clock settings and return
to clock mode.
6-7
22/08/2006 14:10:32
