16
English
16
CD PROGRAMMED PLAY
Use the program function to preselect the order in which a sequence of tracks
will be played.
1. Slide the function selector to the CD position.
2. Press the PROG. button. “PROG” will be displayed on the LCD screen and
“01” will blink.
3. Use the F.FWD or REW buttons to select the first track to include in
the programmed sequence.
4. Press PROG. to confirm and store the track.
5. Repeat steps 3 and 4 to program the other desired tracks.
6. Press Play/Pause to begin playback. The tracks will be played in the
programmed order.
Note:
• To cancel the program function, press the Stop button twice, “PROG” will
disappear from the display.
• During program setting, press Stop or open the CD door to cancel the
setting.
Repeat mode
1. To repeat continuously a single track, press the Repeat button once while
in play mode. “REP1” will be displayed on the LCD screen.
2. To repeat all the tracks, press the Repeat button twice while in play mode.
“REP ALL” will be displayed on the LCD screen.
3. To cancel the repeat function, repeatedly press the Repeat button until
“REP1” or “REP ALL” disappears from the screen.
AUX IN OPERATION
You can play music through the speakers of this CD Player by connecting its
AUX IN jack to your MP3 or other digital audio player.
1. Plug one end of an audio cable (not included) into the AUX IN jack located
at the back of the unit, and the other end of the cable to the line out jack of
the device you want to connect.
2. Slide the function selector to the AUX IN position.
3. Adjust the volume control knob to your desired listening level.
4. Use the function keys of your audio device to pause and resume the
playback, adjust the volume and select the next or the previous track.
IMPORTANT NOTE:
to use the AUX IN jack, the function selector must be
set to the AUX IN position.
RCD200SPIM1092_1Mar_V04.indd 16
01/03/2012 3:31 PM
