29
ENGLISH
TROUBLESHOOTING GUIDE
SPECIFICATIONS
SYMPTOM
CAUSE
SOLUTION
Squealing through
the speakers
Microphone
feedback.
Keep the microphone as far away from the
speakers as the microphone cable allows or
reduce the volume until the noise stops. If
using a commercial CD or MP3, make sure
the balance control is set to the centre position
so you can hear both vocal and music tracks
equally.
No sound from
speakers
Master volume
control is set to
minimum.
Use the master volume c to increase
the overall volume.
Power is off.
Turn power button on and LCD display will
switch on.
Standby mode
is on
Press the “VOICE” button to resume working.
I can’t hear myself
singing
Microphone is not
plugged in.
Plug microphone into Mic 1 or Mic 2 jack.
Volume is too low.
Turn Mic 1 or Mic 2 volume control up.
No sound from
multimedia player
Cable is not
connected
correctly.
Check the Line-in cable is connected from the
multimedia player’s line-out jack to the Media-in
jack.
General
Power supply...................................................................... AC 230V ~ 50Hz
Power consumption............................................................ 25W
Speaker ............................................................................. 8 Ohms
Output power...................................................................... 2 x 8W RMS
Dimensions......................................................................... 13 (W) x 48 (H) inches
Specifications are subject to change without notice.
Standby Mode
After this product remains inactive for more than 15 minutes, the unit will switch to the standby
mode (the LCD display will switch off and the red LED will switch on).
Please press the “VOICE” button to resume working. The red LED will then switch off and the
LCD screen will resume working, showing the last information displayed.
Summary of Contents for MICRO STAR 2 K8010
Page 2: ......
