Copyright © Lexibook 2004
5
SYNCHRONIZATION
Automatic Learn Function
Learn function executes automatically and runs for
approximately 3 minutes when batteries are first
installed in the receiver.
Within these 3 minutes, receiver picks up the temperature & humidity signals from remote
transmitter and displays the readings.
Manual-Learn (Searching for Remote Signals)
If a new remote transmitter is added or if signal is lost (outdoor display blinking), learn function must
be executed again.
Press & hold
ALARM/AM/PM/°C/°F
for 3 seconds to start.
Beep sound indicates that learn function has started.
CHANNEL symbol will flash and unit will beep as each transmitter is
detected.
Temperature & humidity readings of remote transmitter displays on the
receiver.
Press & hold
Channel
for 3 seconds to start auto channel scroll function. In this mode, the
display will scroll through the data from all the valid channels, each of which will be shown for
8 seconds. Press & hold
Channel
for 3 seconds again to disable this function.
SETUP