SM940IM size : 120mm W x 120mm H
English
English
21
22
DATE/MONTH/YEAR SETTING
1. After clock 1 is set, press
Mode [1]
to accept the time settings. Upon pressing Mode, the month and date
will flash.
2. Press the
Hour/+ [2]
to set the month.
3. Press the
Minute/- [3]
to set the date.
4. Press
Mode [1]
, the year will flash. Press the
Hour/+ [2]
to move the year upwards and
Minute/- [3]
to
move the year downwards. Press
Mode [1]
to confirm all your settings.
Clock 2 Settings (Dual Time)
1. Scroll to Clock 2 using
Mode [1]
.
2. Press
Hour/+ [2]
ou
Minute/- [3]
key to change the hour (in hour increments/decrements relative to
Clock 1).
Alarm 1 and Alarm 2 Setting
Scroll to Alarm1 mode (Alarm2 mode) using
Mode [1]
.
1. Press
Hour/+ [2]
to set the hour.
2. Press
Minute/- [3]
to set the minutes.
3. Press
Snooze [5]
to toggle alarm on and off. When the alarm is set
ON
, the bell symbol will appear.
When Alarm Sounds
a. 1 or 2 will flash.
b. Press
Snooze [5]
to snooze the alarm for 5 minutes. After that the alarm will sound again.
c. Press
ANY
other key to turn the alarm sound off. If not manually interrupted, the alarm sound will
automatically stop after one minute.
ALARM SETTING
Throughout the 28 days of the lunar month, the aspect of the moon changes. Indeed, the moon, being
spherical, is always half lightened up by the sun. As the moon rotates around the Earth, the appearance of its
lightened side changes continuously. This phenomenon creates moon phases. The moon phase on your
MeteoClock is automatically updated according to the year/ month/day.
Moon Phase Display
1. New Moon
2. Young Crescent
3. First Quarter
4. Waxing Gibbous
5. Full Moon
6. Waning Gibbous
7. Last Quarter
8. Old Crescent
Check Outside Temperature & Humidity
1. Press
Channel [4]
to toggle between the data of your various remote sensors: Outside 1 (channel 1),
Outside 2 (channel 2), Outside 3 (channel 3), and Outside 4 (channel 4).
Note
: if you do not have any additional sensors, please disregard this function.
°C or °F Temperature Display
2. Toggle between °C and °F by pressing
Snooze/- [5]
in Clock 1 mode.
Min and Max Temperature & Humidity
3. Press
Hour/+ [2]
in Clock 1 mode to display minimum and maximum temperature and humidity records.
MOON PHASES
TEMPERATURE & HUMIDITY DISPLAY
