LEXIBOOK METEOCLOCK ELEGANCE Manual Download Page 6

Page: 6 / 66

English

CLOCK AND ALARM SETTINGS

FIXING THE REMOTE SENSOR AND MAIN UNIT

Remote sensor

The remote sensor can be placed upright on a smooth surface or
wall-mounted. To ensure a good transmission, the remote sensor
should not be installed on or near a large metal surface. Before
choosing the location of the remote sensor, test that the receiver
can receive the signals. It is also recommended that the remote sensor is placed as close as possible
to the main unit to eliminate any interference. The remote sensor can also be wall-mounted. To do so,
locate the wall-mounting hole at the back of the sensor (upper part) and fix it on a hook or nail.

Main unit

The main unit can be fixed on the rotating/pivoting base or on the wall-mounted
base (both included). To use the base, fix the main unit’s socket (located under the
unit) into the base’s jack. Place the base on a smooth, stable surface. To use the
wall-mounted base, insert a screw in each wall-mounting hole (2) and fix it to a wall.
Then, fix the main unit’s socket into the wall-mounted base’s jack.

BACK LIGHT:

To use the back light, press [A15], located below the main unit LCD display. The back light stays on
for 5 seconds.

Manual Time and Date Setting:

1. The setting sequence is displayed in the order:

Hours Minutes Seconds Year Month/Day sequence Month Day Time Zone
Day-of-week language.

2. Press and hold [B4] to enter the manual Clock/Calendar setting mode.
3. Time and date: Press the “+” [B6] or “-” [B7] buttons to adjust the settings and press [B4] to confirm
each setting.
4. The month and day sequence gives you the option to select whether the month or the day is
displayed

first.

Time Zone: The time zone should be set to 0.
Day of the week: It can be displayed in different 8 languages: for English, select

; German

(GE)

French

(FR)

, Spanish

(SP)

, Italian

(IT)

, Dutch

(NE)

, Danish

(DA)

, and Russian

(RU)

Notes:

- You will automatically exit the time setting mode after 5 seconds of inactivity.
-

“DST”

appears on the LCD if the Daylight Saving Time mode has been activated.

12/24 Hour Display mode:

Outside the manual time setting mode, press the [B6] key to select the 12 or 24 hours mode.

Alarm Clock Function:

1. The alarm clock sequence is as follows:
  Time Date Alarm Time
2. Outside the manual time setting mode, press [B4] twice to scroll to the alarm.
3. Press and hold [B4] to set the alarm.
4. Use the [B6] and [B7] buttons to adjust the hour then press [B4].
5. Use the [B6] and [B7] buttons to adjust the minutes then press [B4].
6. Press the [B1] button to turn the alarm ON and OFF. When the alarm is activated, its icon ( )
  will be displayed at [A13].
7. When the alarm rings, you can press the backlit button [A15] to activate the snooze alarm. The
  alarm will ring again 5 minutes later. In the meantime, the alarm icon will blink. If you want to stop
  the alarm, press any button. The alarm will ring again the next day at the same time. If you wish
  to deactivate the alarm completely, you must turn it off (see step 6).