English
5
Discover your radio-controlled Ferrari car
Contents of the packaging
1 x Radio-controlled Ferrari car
1 x radio control
1 x instruction manual
WARNING:
All packaging materials, such as tape, plastic sheets, wire ties and tags are not part
of this toy and should be discarded for your child’s safety.
Battery Information
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be
removed from the toy before being charged. Rechargeable batteries are only to be charged
under adult supervision. Different types of batteries or new and used batteries are not to
be mixed. Only batteries of the same or equivalent type as recommended are to be used.
Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed
from the toy. The supply terminals are not to be short circuited. Do not throw batteries into a
fire. Remove the batteries if you are not going to use the game for a long period of time.
WARNING:
Mal-function or loss of memory may be caused by strong frequency interference
or electrostatic discharge. Should any abnormal function occur, remove the batteries and insert
them again.
1. Steering adjuster
2. ON/OFF button
3. Forward/Backward button
4. Left/Right button
Note:
Effective control distance: 15m. Frequency: 27.145 or 40.685 MHz.
The radio-controlled Ferrari car operates with 4 X 1.5V AA/LR6 type batteries (not included).
The radio control operates with 3 X 1.5V AA/LR6 type batteries (not included).
Radio-controlled Ferrari car
1. Make sure the car is not turned on.
2. Use a screwdriver to open the battery compartment located under the
Ferrari RC car.
3. Install the 4 x LR6/AA type batteries (not included) observing carefully the
polarity indicated at the bottom of the battery compartment and as per the
diagram shown opposite.
4. Close back the battery compartment and tighten the screw.
Radio control
1. Use a screwdriver to open the battery compartment located on the back
side of the radio control.
2. Install the 3 x LR6/AA type batteries (not included) observing carefully the
polarity indicated at the bottom of the battery compartment and as per the
diagram shown opposite.
3. Close back the battery compartment and tighten the screw.
IT060FEIM0449.indd 5
21/12/2009 3:36 PM