LEXGO LEX R9, User Manual

Page: 10 / 16

10
7. DI CONTROL PANEL
To enable electric motor service, you must turn on the control panel on the handlebars.
On the panel, you can see information such as battery charge, distance traveled, and set
the speed limit (displayed by the gear indicator) and the unit of measurement of the
distance traveled.
• Turn on: Press the ON/OFF OFF
button
to turn on the control panel.
• Off: To turn off, hold down the ON/OFF
button for 2 seconds.
• Speedometer: This display shows the
instant
speed of the vehicle. The unit
of
measurement of the
speed can
be
km/h
• Front headlight: Press twice in a row to access or
turn off the light.
Speedome
ter
ON/OFF
button
Display
a led
Driving
indica
tion
Battery
indicator
• Gear: Press the power button once to set the desired gear (limit speed). The gear set to
choose from the three available, will be indicated by the illuminated LED
In Green on the left indicates gear 1 (minimum speed limit) that Right gear 2 (average speed limit),
Both LED I turned on gear 3 (maximum speed limit). The speed limits you set are indicated in
the "Technical Features" section.
• Battery indicator: This indicator has 4 bright LEDs that indicate the battery charge status.
Depending on the number of LEDs on we have the following charge .
LED
Lit
1
(flashing)
1 2 3 4
% CARICA
0-20% 21-40% 41-70% 71-85% 86-100%
WARNINGS ABOUT USING THE CONTROL PANEL
Respect the following warnings when handling the control panel:
1 . Use the Control Panel with caution. Never try to disconnect the connectors, especially
when the battery is on.
2 . Prevent the control panel from being bumped. .