74
Onboard Serial Port 1&2
Select an address and corresponding interrupt for the first and the second serial ports.
Settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
PWRON After PWR-fail
This item specifies whether your system will reboot after a power failure or interrupt occurs.
Settings are: Off: Leaves the computer in the power off state.
On: Leaves the computer in the power on state.
Former-Sts: Restores the system to the status before power failure or interrupt occurred.
4-7-2
Super IO Device
[3F8/IRQ4]
Phoenix-AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Onboard Serial Port 1
PWRON After PWR-Fail [Former-Sts]
Menu Level >>
:Move Enter:Select +/
- /PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
↑↓← →
Onboard Serial Port 2 [2F8/IRQ3]
4-7-3
USB Device Setting
Phoenix-AwardBIOS CMOS Setup Utility
USB Device Function
Item Help
USB 1.0 Controller [ Enabled ]
USB 2.0 Controller [ Enabled ]
USB Operation Mode [ High Speed ]
USB Keyboard Function [ Enabled ]
USB Mouse Function [ Enabled ]
USB Storage Function [ Enabled ]
Menu Level >>
:Move Enter:Select +/
- /PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
↑↓← →
Summary of Contents for MI945A
Page 5: ...DEC 08 2008 2008...
