Congratulations on purchasing your new lighting effect
from Lexlighting. Reading through this manual will ensure
trouble free and long life operation of the unit.
Features:
- 256 LED’s (Red, Green, Blue & White)
- Sound To Light (Inbuilt Microphone)
- Full DMX (2 or 8 Channels) *selectable*
- Master/Slave Mode
- Digital Settings Display
Contents:
- Light Unit LexIcon
- IEC Mains Cable UK Plug
- User Manual
MODE
ENTER
UP
DOWN
MENU Configuration Chart - Digital Display
Menu
Sub Menu
Function
Addr
A001-A512
Sets the fixture DMX Address
SPEE
SP00 - SP99
Sets the speed of the Auto Run Patterns
(SP00 = Slow / SP99 = Fast
COLO
C001 - C015
Sets the LED Colours
FLSH
FL00 - FL51
Sets the Flash/Strobe Speed. (FL00 =
Slow / FL51 = Fast
CHND
2CH or 8CH
Sets the fixture to have 2 DMX channels
or 8 DMX Channels
AUTO
SH00 - SH12
Selects 1 of the Auto Run Patterns
pre-programmed to the fixture.
SOUN
none
This simply puts the unit into Sound-
Light Mode using the inbuilt-Microphone
BLND
YES or NO
Turns off all LED’s. YES = All Off / NO
= ON
dISP
YES or NO
Allows you to alter which way the Digital
Display is displayed. NO = Normal / Yes
= Upside down
SLA
none
Simply makes your ICON a slave
Sound to Light / Sound Active Mode
To put your icon into sound active mode simply follow the steps below:
1. Press MENU
2. Scroll through using UP and DOWN buttons until “SOUN” is
displayed
3. Press ENTER
4. Adjust the Sensitivity Dial as required.
Your fixture is now in Sound Active mode and will go through all of its
internal patterns one by one activated by the sound from its in-built
microphone.
