Levtech Service
& Prodtuction SRL
Settings
LAN Settings
Here we can change or reset the network parameters of the controller. For easier
navigation, the menu is divided into 5 parts. You must enter a username and password to
log in.
Username
: admin
Password
: password
Wifi configurations
Here we can connect the controller to our own home Wi-Fi network, setting the appropriate
parameters. For this, we need to tick the
Enable
window.
We can search for our network with the
Scan button
, and then enter the password of our
network in the
Wifi password
field.
By checking
DHCP
, we can access the controller automatically, without entering the
following IP address and other datas.
Save with the
Logout
, then
Save and Exit
button so that the controller can function
properly. It is absolutely necessary to restart the Wi-Fi communication, which is
automatically performed by the controller.
Attention
!
Once the controller has been connected to our own network, it can only be
accessed via the Solar_control wifi network at the address
http://solar.local
.
