8
U S I N G YO U R A I R P U R I F I E R
General Operation
Sleep Mode
Timer
Memory Function
Automatic Shutoff
Auto Mode
1.
Place the air purifier on a hard,
flat surface. Leave 38 cm / 15 in of
clearance on all sides of the air purifier.
2.
Plug in. Press
to turn on the air
purifier. The fan will start automatically.
3.
Optionally, press
to change the fan
speed. You can also select Auto Mode
or Sleep Mode, or select a timer.
•
For best results, or to address a
specific air quality issue such as
smoke, run the air purifier at high
speed for 15–20 minutes before
using a lower speed or Auto Mode.
•
To effectively clean air, keep
windows and doors closed while the
air purifier is operating.
4.
Press
to turn off the air purifier.
Auto Mode adjusts the fan speed
automatically based on air quality. For
example, if the air quality is bad, the fan will
be set to high speed.
The air purifier will remember its
programmed settings when turned off, and
will resume these settings when turned
back on.
As a safety feature, the air purifier will
automatically turn off if the filter cover is
removed.
Sleep Mode uses the lowest possible fan
speed to operate quietly.
•
Press
to turn Auto Mode on/off.
•
Pressing
or
will also exit Auto
Mode.
•
Press
to turn Sleep Mode on/off.
•
Pressing
or
will also exit Sleep
Mode.
•
Press
to turn the timer on/off, and
to cycle through timer options (2, 4, or 8
hours).
•
The air purifier will automatically turn off
once the timer is finished.
Note:
•
You can change the fan speed at any time
while the timer is counting down. The timer
will work with any mode.
•
Pressing
or unplugging the air purifier will
cancel the timer.
Note:
The air purifier will not remember timers.
01.01_UML_LV-H135_ConsoleTrueHEPAAirPurifier.indd 8
01.01_UML_LV-H135_ConsoleTrueHEPAAirPurifier.indd 8
2/7/20 11:28 AM
2/7/20 11:28 AM