Levoit LV-H132, User Manual

Page: 15 / 20

15
Resetting the Air Purifier
Performing a Hard Reset
The air purifier must be reset if ‘ ’ lights up, and after checking or replacing the air filters.
1. Plug in the air purifier and turn it on.
2. Press and hold ‘ ’ for 3 seconds.
3. Release ‘ ’ and the light will turn off, indicating that the reset is complete.
NOTE:
• DO NOT wash and reuse air filters. The air filters cannot be be cleaned manually.
• Only use Levoit LV-H132-RF True HEPA Filters when changing the filter for this device.
• Scan the QR Code to the right to purchase new air filters.
When using the air purifier in an environment of heavy pollution, the lifespan of the air filters may be
significantly reduced. You can change the filters even if ‘
’ does not light up. Follow the steps below to
perform a hard reset.
1. Replace the air filters as mentioned in the Replacing the Air Filters section on page 13.
2. Plug in the air purifier and turn it on.
3. Press and hold ‘
’ for 3 seconds, and it will light up.
4. Press and hold ‘ ’ again for 3 seconds, and it will turn off . The reset is now complete.