20
7.1.6.
Light kit
7.1.7.
Horn
7.1.8.
Locking/ unlocking the wheelchair
The VR2 control system can be locked to prevent unauthorized use. The locking
method is via a sequence of key presses and joystick movements, as detailed below:
To lock the wheelchair:
While the control system is switched on, press and hold the on/off button.
After 1 second the control will beep. Now release the on/off button.
Move the joystick forwards until the control system beeps.
Move the joystick in reverse until the control system beeps.
Release the joystick, there will be a long beep.
The wheelchair is now locked.
To unlock the wheelchair:
Use the on/off button to switch the control system on. The speed indicator will
be rippling up and down.
Move the joystick forwards until the control system beeps.
Move the joystick in reverse until the control system beeps.
Release the joystick, there will be a long beep.
The wheelchair is now unlocked.
If you chose the optional light kit for
your chair, the keypad looks as
shown on the left.
To activate the lights, press the light-
button to switch on the two front and
two rear lights on your chair.
To indicate a left turn, press the left
indicator-button. To indicate to the
right, press the right indicator button.
If you have a breakdown or you
would like to call attention to
yourself, you can activate all
indicators at the same time with the
warning-lights-button.
Indicator-
buttons
This button sounds the horn.
Warning-
lights-
button
Light-
button
