31
11.2.
Change of the seat width
11.3.
Change the distance between the armrests
11.4.
Adjustment of the backrest angle
First, take off the seat cushion.
Telescope the seat plate to the first
position (see section 11.1.)
Untighten the 8 screws (A) at the
seat plate, to be able to take off the
whole seat plate.
Put the new wider/smaller seat plate
on the chair and tighten the 8 screws
to fix the new seat plate.
The adjust the distance between the
armrests to the seat plate, follow the
instructions in section 11.3.
To adjust the knee support to the
changed seat width, follow the
instructions in section 11.9.
If the chair is equipped with the skirt
guard, you have to change the
bracket, to match it with the seat
width.
Untighten the two screws. Now you
can adjust the armrests in the width.
If you have adjusted them to the
desired width, tighten the screws.
A
A
A
A
A
A
A
A
You can adjust the backrest in
different angles.
Unscrew the lever-screw (A) on both
sides. Now you can tilt the backrest
back and forwards to the desired
angle. Put the lever-screw (A) into
the hole where the backrest post and
the plate correspond.
A
