15
8.8. CHANGING SUPPORT MODES ON THE REMOTE (TCU 1)
B
D
C
A
8.9
Fig. 8.9
A -TURBO BUTTON:
•
Automatically changes to TURBO mode regardless of the mode the bicycle is in.
B - WALK-ASSIST BUTTON:
•
Pressing and holding activates the walk-assist mode. This provides motor assist at 6 km/h / 3.7
mph to help push the bicycle uphill when walking.
C - (+) BUTTON:
•
Increases the amount of support.
D - (-) BUTTON:
•
Decreases the amount of support.
NOTE: On the remote, after reaching the strongest or weakest mode, the system will not
continue to switch. To reduce from TURBO to TRAIL to ECO to OFF, you have to press the -
button. To increase from OFF to ECO to TRAIL to TURBO, you have to press the + button.
MICRO TUNE MODE:
Long pressing the (+) button on the remote will switch to Micro Tune mode, this mode
allows you to change the level of support in small increments while riding.
To switch out of Micro Tune and back to standard settings long-press the (+) button again.
8.7. CHANGING SUPPORT MODES ON THE TCU
TURBO
TRAIL
ECO
OFF
SMART
CONTROL
+
2
SEC
Bluetooth
8.8
Fig. 8.8
The drive setting modes are displayed around the S-Button (mode) (Fig. 8.1). Pressing the
S-Button cycles through the modes (Fig. 8.8).
The modes will cycle through the three main support modes, starting at TRAIL (default).
OFF MODE is activated by a long press of the S-Button (MODE).
Modes cannot be changed directly on the TCU 2, all interactions other than
powering the bicycle on and off are performed with the remote.
