© 2019 Leviton Mfg. Co., Inc.
Statement Caution
Changes or modifications not expressly approved by Leviton Manufacturing Co., could void the user’s authority to operate the equipment.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device."
TRADEMARK DISCLAIMER
Use herein of third party trademarks, service marks, trade names, brand names and/or product names are for informational purposes only, are/may be the trademarks of their respective owners; such
use is not meant to imply affiliation, sponsorship, or endorsement. Lumina is a registered trademark of Leviton Manufacturing Co., Inc. Bluetooth is a trademark of Bluetooth SIG. Android is a registered
trademark of Google, LLC. iOS is a trademark of Cisco. Mark 10 is a registered trademark of Advance Transformer Co.
RF EXPOSURE AND CO-LOCATION:
To comply with FCC and ISED RF exposure limits for general population / uncontrolled exposure this device should be installed and operated with a minimum distance of 7.9 inches (20 cm) between
the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at
Leviton Manufacturing of Canada Ltd to the attention of the Quality
Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9
or by telephone at
1 800 405-5320.
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper
use for five years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty
excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused,
opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including
merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a
particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment,
lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
SPECIFICATIONS
Catalog Nos.
LU20S-DNW
Switching Relay
LU107-DNW
0-10V Dimmer, 50 mA Sink
LU04P-1NW
Phase Cut Dimmer
Input Voltage/Frequency
120-277VAC, 50/60Hz
120-277VAC, 50/60Hz
120VAC, 60Hz
Input Current
120V Standby: 0.2W
Max: 0.5W+Load Current
Standby: 0.2W
Max: 0.5W+Load Current
Standby: 1.0W
Max: 1.2W+Load Current
277V Standby: 0.3W
Max: 0.6W+Load Current
Standby: 0.3W
Max: 0.6W+Load Current
Not rated for use
Load Ratings
General Purpose Rating @ 120V 20A
Not rated for use
Not rated for use
LED, CFL, Electronic Ballast @ 120V 10A
8A
360W
LED, CFL, Electronic Ballast @ 277V 10A
5A
Not rated for use
Mark 10
®
@ 120V Not rated for use
Not rated for use
800VA
Magnetic Ballast @ 120V 10A
10A
800W
Magnetic Ballast @ 277V 10A
10A
Not rated for use
Resistive, Tungsten @ 120V 6.67A
6.67A
800W
Resistive, Tungsten @ 277V 6.67A
6.67A
Not rated for use
Motor @ 120V 1/4Hp (FLA 5.8A)
1/4Hp (FLA 5.8A)
Not rated for use
Motor @ 277V 1/3Hp (FLA 3.0A)
1/3Hp (FLA 3.0A)
Not rated for use
IP Rating
IP30
Network Connections
IEEE 802.15.4, 2.4GHz, wireless, mesh network up to 75 ft range between device
Operating Temperature
0°C - 50°C (32°F - 122°F)
Storage Temperature
-40°C to 85°C (-40°F - 185°F)
Purpose of Control
Operating control
Action Control Type
1
Pollution Degree
2
Impulse Voltage
4000V
4000V
2500V
Configuration and Programming
1
.
System Configuration is performed using the Leviton Lumina
®
RF SA application,
downloadable from Google Play or the Apple Store, using any Bluetooth
™
enabled Android
™
or iOS
™
device. Use the
application to:
a. Manually add/remove devices to or from the room.
b. Add additional keypads, load controllers, sensors, switches or dimmers to the
room.
c. Change Sensor Parameters like Sensitivity, Timeout, target light level, and
other settings.
d. Create user defined groups of fixtures.
e. Define Scenes (Meeting, Presentation, Lunch, Dinner, Test, etc.).
PK-A3314-10-00-2A-X3
For Technical Assistance Call: 1-800-824-3005 (U.S. Only) or 1-800-405-5320 (Canada Only) www.leviton.com
2
.
Factory Default: resets device to out of the box state.
a. For LU20S and LU107:
• Push button on device for more than 20 seconds (but less than 25). Locator
light will blink AMBER at 5 and 20 second intervals.
NOTE
: release button
after 20 second light flash.
• Release button.
• When complete, device will reboot then revert to auto join mode where it is
searching for a network to join. Locator light will blink GREEN slowly while
looking for an open network.
b. For LU04P:
• Press and hold button for 14 seconds. The locator light quickly flash red/
amber.
• Release button.
• When reset is complete, device will reboot. Follow the LU04P instructions in
Installation section to add it into a system.
