6
OPEN
LOCK
FUSE
250VAC 5A
SLOW BLOW
TO EXTEND LED LIFESPAN
• Keep unit clean and vent holes clear from debris
• Maintain adequate ventilation around the fixture while in use
• Reduce ambient temperature
• Limit overall projection intensity
LENS CLEANING
• Unplug LED Follow Spot from power and wait until fixture is at room temperature
• Open lens compartment door by lifting the two spring clips on the top of the lens tube
• Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth
• DO NOT use ammonia-based or other harsh commercial cleaners (Isopropyl alcohol may be used on the cloth)
• Ensure all parts are completely dry before restoring power
• Replace lenses if they contain visible damage (cracks or deep scratches)
FUSE REPLACEMENT
• Unplug the product from power.
• Using a slotted screwdriver, push slightly at the slot of the fuse cap and rotate
counterclockwise to open.
• Remove fuse cap and fuse. Place new fuse inside the fuse cap.
• Screw the fuse cap with new fuse back in place and reconnect power.
MAINTENANCE
To eliminate unnecessary wear and improve lifespan, disconnect the LEO™ LED Follow Spot completely from power when
not in use.
NOTE: LEO™ LED Follow Spot comes with a power lead terminated with a powerCON A connector on one side, and a PBG
NEMA 5-15P connector on the other side. Other connector options are available from Leviton or may be installed by your
contractor.
Power Cable Color Coding for Inspection
Connection
Wire
Wire
AC Live
Brown
Black
AC Neutral
Blue
White
AC Ground
Green/Yellow
Green/Yellow
Accessory
Part Number
Drop-In Iris
LEDAC-IRS
B Size Metal Gobo Holder (W 3-3/4", Open Dia 2-3/4")
LEDAC-PTN
5-Color Changer (Black)
N/A - Available with fixture only
5-Color Changer (White)
N/A - Available with fixture only
Follow Spot Tripod
LEDFS-STD
Follow Spot Tripod with wheels
LEDFS-STW
ACCESSORIES
To eliminate unnecessary wear and improve lifespan, disconnect the LEO™ LED Follow Spot completely from power when
not in use.
