','5&$
© 2019 Leviton Mfg. Co., Inc.
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
FOR CANADA ONLY
)RUZDUUDQW\LQIRUPDWLRQDQGRUSURGXFWUHWXUQVUHVLGHQWVRI&DQDGDVKRXOGFRQWDFW/HYLWRQLQZULWLQJDW
Leviton Manufacturing of Canada ULC to the attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec),
Canada H9R 1E9
or by telephone at
1 800 405-5320.
FCC Compliance Statement:
7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV$GLJLWDOGHYLFHSXUVXDQWWRSDUWRIWKH)&&5XOHV7KHVHOLPLWVDUHGHVLJQHGWRSURYLGHUHDVRQDEOHSURWHFWLRQDJDLQVWKDUPIXOLQWHUIHUHQFHZKHQWKHHTXLSPHQWLVRSHUDWHGLQDFRPPHUFLDO
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is
OLNHO\WRFDXVHKDUPIXOLQWHUIHUHQFHLQZKLFKFDVHWKHXVHUZLOOEHUHTXLUHGWRFRUUHFWWKHLQWHUIHUHQFHDWKLVRZQH[SHQVH
FCC Suppliers Declaration of Conformity
7KLVGHYLFHFRPSOLHVZLWKSDUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQV7KLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHG
operation. Manufactured by Leviton Manufacturing, Co., Inc. 221 North Service Road, Melville, NY 11747. www.leviton.com
$Q\FKDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\/HYLWRQFRXOGYRLGWKHXVHU¶VDXWKRULW\WRRSHUDWHWKLVHTXLSPHQW
IC STATEMENT
7KLVGHYLFHFRPSOLHVZLWK,QGXVWU\&DQDGDOLFHQVHH[HPSW566VWDQGDUGV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVWKLVGHYLFHPD\QRWFDXVHLQWHUIHUHQFHDQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHG
operation of the device.
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date. Leviton’s
only obligation is to correct such defects by repair or replacement, at its option.
For details visit www.leviton.com or call 1-800-824-3005.
This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void
if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions.
There are no other or implied
warranties of any kind, including merchantability and fitness for a particular purpose
, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is
limited to five years.
Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation
.
The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
1.
&RQ¿JXULQJWKHFRQWUROOHU
In order to configure a room with the DRC it is necessary to have an iOS or Android Wi-Fi capa-
ble device with the Leviton GreenMax DRC app installed. Connect to the DRC Controller as a
Wi-Fi access point then use the app to move through the configuration process.
•
Factory Default Access Point Name: GreenMax DRC-[serial number]
(The serial number is printed on the product label, use only last four characters.)
• Factory Default Security: WEP Security, Password: leviton0000
2.
&KDQJLQJQHWZRUNFRQ¿JXUDWLRQ
In situations where a wireless access point or password is changed but the configuration of the
DRC needs to remain the same use the following procedure to reset the network and reconnect
to the device:
• Press and hold the Wi-Fi button for 20 seconds until the Wi-Fi LED flashes green rapidly.
• Release the button.
•
The LED will continue to flash green rapidly until the reset cycle is complete. The LED will go
dark then blink slowly indicating that it is ready for connection using its factory default AP name
and credentials.
NOTE
: even though you can connect to the app, you must be granted access by the site admin-
istrator to use the app for configuration.
&RQ¿JXUDWLRQ
TRADEMARK DISCLAIMER
:
7KH/HYLWRQZRUGPDUNDQGORJRDQGWKH*UHHQ0D[/XPD&$1/XPLQD,QWHOOHFWWUDGHPDUNVDUHWKHSURSHUW\RI/HYLWRQ0DQXIDFWXULQJ&R,QF:L)L=LJEHHDQG'$/,DUHWKLUGSDUW\WUDGHPDUNVWKHSURSHUW\RIWKHLUUHVSHFWLYHRZQHUV
8VHKHUHLQRIWKLUGSDUW\WUDGHPDUNVVHUYLFHPDUNVWUDGHQDPHVEUDQGQDPHVDQGRUSURGXFWQDPHVDUHIRULQIRUPDWLRQDOSXUSRVHVRQO\VXFKXVHLVQRWPHDQWWRLPSO\DI¿OLDWLRQVSRQVRUVKLSRUHQGRUVHPHQW
Troubleshooting
1.
Lights are ON after power outage.
• This is the normal operation. The smart pack has a fail-safe feature which forces the relay to
close on loss of power and the 0-10V at full output. Approximately 7-10 seconds after power
is restored the device will return to its previous state and continue to monitor the LumaCAN
network for any changes.
2.
Device does not operate immediately after power ON
.
• This is the normal operation. The device has a 7-10 second startup time before it will begin
operation.
3.
/LJKWVÀLFNHULQJ
• Lamp or lamp socket has a bad connection.
• Intermediate wires not secured firmly with wire connectors.
4.
Lights did not turn ON.
• Circuit breaker has tripped, or the fuse has blown.
• Bulbs, tubes burn out.
• Fixture Hot or Neutral connection is not wired.
5.
+HDUWEHDW/('LVHLWKHU5('RU:+,7(
• Represents a processor or application failure. Try power cycling the DRC Smart Pack.
Emergency operation
The DRC Smart Pack can be used as a UL 924 emergency bypass device ensuring that the
relay is closed during a power failure condition. Availability of input power to power the load
is the responsibility of others. Two options for sensing power to determine whether you are in
“emergency” are available and your Construction Documents will dictate which you are to use.
The options and features of normal sense are as follows:
• Sense is Line Power through the Black wire
: Upon loss of supplying power to the device,
relay will close.
• Sense is power over LumaCAN
: Upon loss of +24V power on LumaCAN cable relay
will close.
NOTE: The "Emergency Circuits" label shall be placed on the DRC Smart Pack so the
user is aware this device is used for emergency lighting.
EMERGENCY
Sense Switch
LINE
CAN
EMERGENCY
Sense Switch
LINE
CAN
EM
E
RG
E
NCY
Sens
e Switc
h
LINE
CAN
LumaCAN Ports
Emergency Sense Switch
• Can Mode
- On loss of +24VDC LumaCAN power Smart Pack will close RELAY and force 0-10V to MAX
brightness
- On loss of LINE power the Smart Pack will close RELAY and force 0-10V to MAX brightness.
• Line Mode
- On loss of LINE power the Smart Pack will close RELAY and force 0-10V to MAX brightness.
When used in emergency systems:
LumaCan
LumaCan
Neutral
Hot
Hot
White
Black
Blue/
White
Neutral
Neutral (white)
0-10V (violet)
Com (gray)
Hot (blue)
Emergency
Lighting
Smart Pack
To Load
Normal
Panel
Emergency
Panel
Green
$
CAN mode (cont'd)
Lum
a
C
a
n
Lum
a
C
a
n
Hot
Hot
WH
WH
BLK
BL/WH
Neutr
a
l
Neutr
a
l
Neutr
a
l (white)
Lum
a
CAN
Power
Supply
Norm
a
l
P
a
nel
Emergency
P
a
nel
Emergency
Lighting
Sm
a
rt
P
a
ck
0-10V (violet)
Com (gr
a
y)
Hot (blue)
To Emergency
Lighting Lo
a
d
Green
BLK
$
2. Sense: CAN mode details
WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT
BREAKER OR FUSE AND TURN OFF POWER AT THE 24 HOUR NIGHT LIGHT/
EMERGENCY CIRCUIT AND TEST THAT POWER IN BOTH CIRCUITS IS OFF
BEFORE WIRING, SERVICING, OR REMOVING FIXTURE.
7+,6),;785(,6
32:(5('%<7:2&,5&8,767+(5(*8/$532:(5%5$1&+&,5&8,7$1'
7+(+2851,*+7/,*+7(0(5*(1&<&,5&8,7
In this scenario, both the power input wires AND the Load In are connected to the
emergency source. The Smart Pack monitors the LumaCAN cable and upon loss of
power, the relay closes and force the 0-10V control wires to MAX brightness. The
advantage of this scenario is that only emergency power is run to the DRC Smart Pack
so separation of normal and emergency at this location is not required.
In this scenario, the supply input wires are connected to normal power, and the Load
In for the relay is connected to emergency power. Upon loss of normal power, the relay
closes, and the 0-10V lines go to high impedance allowing the load to go to full output
powered from the emergency source. The Emergency Switch must be in the LINE
position. Upon restoration of normal power, DRC Smart Pack will automatically resume
normal operation.
1. Sense: Line mode details
WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT
BREAKER OR FUSE AND TURN OFF POWER AT THE 24 HOUR NIGHT LIGHT/
EMERGENCY CIRCUIT AND TEST THAT POWER IN BOTH CIRCUITS IS OFF
BEFORE WIRING, SERVICING, OR REMOVING FIXTURE.
7+,6),;785(,6
32:(5('%<7:2&,5&8,767+(5(*8/$532:(5%5$1&+&,5&8,7$1'
7+(+2851,*+7/,*+7(0(5*(1&<&,5&8,7
3. Emergency self test -
NFPA 101 Life Safety Code and NEC {Article 700.3 (B)} requires regular testing of all emer-
gency equipment. To perform a test of these products, use the EM control breaker to interrupt
normal power to the device, or the device providing power to the LumaCAN network which will
put the Smart Pack into the Emergency behavior. Alternatively, if desired or if your jurisdiction
requires it, you can use a standard toggle switch on the normal power line to trigger the emer-
gency systems test.
This test switch must be located local to the load being controlled
.
Some jurisdictions may disallow multiple Smart Packs on a test switch or use of breaker in a
panel as a test switch. Clarify with all local authorities.
$
Notes specific to this scenario:
• The Emergency Switch must be in the CAN position.
• CAUTION: The systems designer and installer must verify that any and all power supplies
which could supply power to either LumaCAN cable segment are fed from normal power and
are not connected to a UPS or other power source which could be powered in an emergency
mode condition.
• DRC Smart Pack will go to full output within 1 second.
• Upon restoration of normal power, the DRC Smart Pack will automatically resume normal operation.
• No power provided to LumaCAN network.
WEB
VERSION