© 2018 Leviton Mfg. Co., Inc.
Restore Power:
Restore power at circuit breaker or fuse.
Installation is complete.
Step 7
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
• Fan does not turn ON
- Circuit breaker or fuse has tripped.
- Fan has burned out.
- Fan Neutral connection is not wired.
3-Way Wiring Application:
Step 4b
Fan Speed Control Mounting:
WARNING:
TO AVOID FIRE, SHOCK, OR DEATH; TURN
OFF POWER at circuit breaker or fuse and test that power is off
before wiring or servicing fixture!
Step 6
Installation may now be completed
by carefully positioning all wires
to provide room in wall box for the
control. Mount the control into box
with mounting screws supplied.
Attach wallplate.
ON:
Push rocker switch "ON"
OFF:
Push rocker switch "OFF"
CHANGING SPEEDS:
Move slide bar
- Fan will change speeds.
Testing your Fan Speed Control prior to
mounting in the wall box:
Step 5
NOTE: If using the control in a 3-way application, the control will turn
ON at the speed level set on the control's slide bar. The fan can be
controlled from either the control or the switch location.
DI-000-0661F-02A
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date. Leviton’s only obligation is to correct
such defects by repair or replacement, at its option.
For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions.
There are no other or implied warranties of any kind, including merchantability and fitness for
a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should
contact Leviton in writing at
Leviton Manufacturing of Canada Ltd to the
attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-
Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
Slide bar
to vary
the speed
of the fan
Push
ON/OFF
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to
GREEN control lead.
• Common (Line hot or Load) wire to
BLACK control lead.
• Remove insulating label and connect the first traveler wire to the
RED
control lead.
• Connect the second traveler wire to the remaining
RED control lead.
Proceed to Step 5.
Operation
Troubleshooting
• Restore power at circuit breaker
or fuse.
• Carefully holding control as
shown, slide control lever to
highest position. If fan is not ON,
press rocker. Fan should turn
ON to highest speed level.
If fan does not turn ON, refer
to the TROUBLESHOOTING
section.
Black
Tag
Red
Neutral
Ground
Green
Red
Insert wires
straight
then twist
clockwise
Electrical Tape
Green
Ground
Black
Red
Hot (Black)
Neutral (white)
Line
120VAC, 60Hz
Red
Black Screw
(common)
3-Way Switch
Fan Speed Control
