Leviton 078477877579, Installation Manual

Page: 14 / 18

8 OPERATING INSTRUCTIONS
14
8.3 To Restrict User Activation via RFID Card (Continued)
3. To enable charging with RFID card(s)
• Charging can be enabled with your standard RFID cards
1.
Enable charging.
TAP your RFID card to the front of
the charger over the image of the
RFID. The POWER light will turn
solid green when the RFID card
has enabled the unit to charge.
2.
Start charging.
Press and hold the black button on
the top of the charge plug and insert
it into the inlet on your car. Charging
starts automatically. The CHARGE
light will flash green.
3.
How to stop and restart.
To stop charging, press black button on
top of charge plug to remove plug. To
restart charging, tap your RFID card,
press black button and reinsert.
4.
After charging is complete.
NOTE: When charging is complete, loop
charging cable over station to prevent
tripping hazard.
NOTE: If the charging station is not
being used for an extended period
of time, it should be turned off.
Button
Button
WEB
VERSION