HYDROFOIL ASSEMBLY INSTRUCTIONS
GDM003450-ENG-A
Manufacturer: LEVITA
Z
14 / 25
Contact:
Confidentiality code: GREEN
5.3
Adjustment of the rearwing’s angle of attack
11.
In order to adjust the desired angle of
attack use the Inbus 3,0mm tool (C)
provided in the Tool kit.
Both threaded pins are pre-greased and
pre-mounted
Figure 5.11
Figure 5.12
12.
The two threaded pins (7) adjust the
angle of attack. To adjust the front foot
pressure, follow these instructions:
Turn the lower screw (bottom
side) clockwise to increase front
foot pressure. See figure 5.11.
Turn the upper screw (box side)
to reduce front foot pressure. See
figure 5.12.
It takes two to three turns to
adjust the desired angle.
It is recommended to lock both
screws to ensure maximum
safety.
NOTICE!
Ensure that the threaded pins for angle adjustment are always
greased and free from dirt or sand prior to the assembly.
5.4
Control correct assembly
Check your hydrofoil prior to each use. Ensure that the screws are tight and there are no
cracks, holes or scratches which could compromise your Foil System’s structure.
