Levitaz BOOM AIR, User Manual

Page: 10 / 18

10
Insert the suplied track T-nuts into the base plate tracks. Position the Foil on
the tracks in your wished position and align the T-nuts under the inserts for
the screws. Insert the screws and tighten them.
(Tightening torque 9 +/- 1 Nm)
For further information regarding the foil position see chapter FOIL MOUN -
TING POSITION GUIDE.
6
NOTICE!
Only use with supplied T-nuts and screws. T-Nuts
with open bottom and longer screws can damage
your board!
NOTICE!
Do not use power tools for the assembly or disas -
sembly process.This may cause serious damage to
the product as control of torque and power is limited.
Doing so will render your warranty void.
NOTICE!
Over tightening screws can cause irreversible dama -
ge to the tracks. Doing so will render your warranty
void.
NOTICE!
Ensure that all surfaces are free from dirt or sand pri -
or to the assembly. Pay close attention to the Board
Adapter on the foil system and the board tracks.