28
ENGLISH
3. Close supervision is necessary when this product is used on or near children. Electrical
burns or chocking accident may occur if a child swallow a small part detached from the device
4. Use this product only for its intended use as described in this manual. Do not use
attachment not recommended by the manufacturer
5. Never operate this product if it has a damaged cord or plug, if it is not working properly,
or if it has been dropped, damaged, or dropped into water. Return the product to a service
centre for examination and repair
6. Keep the cord away from heated surfaces
7. Never block the air openings of this product or place it on a soft surface, such as a bed
or couch, where their openings may be blocked. Keep the air openings free of lint, hairs,
and other similar particles
8. Never drop or insert any object into any opening or hose
9. Do not modify this equipment without authorization of the manufacturer
10. Mattress cover has passed skin sensitization and skin irritation test. However, if you
suspect that you may have had or are having an allergic reaction, please consult
a physician immediately
11. If there is a possibility of electro-magnetic interference with mobile phones,
please increase the distance to 3,3m between devices or turn off the mobile phone
CAUTION!
If there is a possibility of electro-magnetic interference with mobile phones, please
increase the distance (3,3m) between devices or turn off the mobile phone.
13. OPERATION
NOTE: Always read the operating instruction before use
13.1 General operation
1. Switch on the main power switch found on the side
of the pump.
2. Once the pump begins delivering air into the
mattress it will take approximately 30 minutes to
fully inflate the mattress.
3. Every time when mattress is first setup for use, It
will be forced to execute Maxfirm for the quickest
inflation. The low-pressure indicator (yellow LED)
will light up when the mattress is not fully inflated at
initial inflation. If the appropriate pressure is
reached, the low-pressure indicator (yellow LED)
will go off.
4. When the initial inflation (Maxfirm process) is completed,
the system will automatically enter the Auto-Adjust process.
5. According to the weight and height of the patient, the
system will automatically adjust an appropriate
pressure setting to ensure the patient’s comfort, and
then enter to alternating mode.
Summary of Contents for DOMUS LAD690
Page 19: ...19 ITALIANO Note...
Page 36: ......
