LEVITAS DOMUS 3 Series, Instruction Manual

Page: 27 / 36

27
ENGLISH
Wipe the pump unit with a damp cloth and a mild detergent. If other detergent is used, choose
one that will have no chemical effects on the surface of the plastic case of the pump unit.
Wipe down the mattress with warm water containing a mild detergent. The cover may also be
cleaned by using sodium hypochlorite diluted in water. All parts should be air dried thoroughly
before use.
CAUTION: Do not immerse or soak pump unit.
CAUTION: Do not use phenolic based product for cleaning.
CAUTION: After cleaning, dry the mattress without direct exposure sunlight.
WARNING!
Unplug the pump before starting the cleaning procedure
Cover Material: Nylon/PU
Cover Material: Nylon/PU
Cover Material: Stretch
14. STORAGE
For single cells mattress:
1. Lay the bubble pad or mattress on a flat surface and upside down
2. Roll-up the mattress from the head end towards the foot end
3. Foot-end strap can then be stretched around the rolled pad/ mattress to prevent unrolling
CAUTION: Do not fold, crease or stack the mattresses.
15. MAINTENANCE
The LEVITAS devices by MORETTI are checked carefully and supplied with EC mark, once
launched on the market.
The products are intended to offer safe and reliable operation when used or installed accor-
ding to the instructions provided by the manufacturer, who recommends that the system be
inspected and serviced by authorized technicians if there are any signs of wear or concerns
with device function. Otherwise, service and inspection of the devices generally should be
done every 2 years.
15.1 General
1. Check main power cord and do not plug it if there is an abrasion or excessive wear.
2. Check mattress cover for signs of wear or damage.
3. Disconnect the air tube from the mattress. Then check the airflow coming from the two
air outlets on the pump. They should be alternately delivering air when the pump is set
at “alternate” mode.
4. Check the air hoses if there is kink or breaks. For replacement, please local distributor.