Levita HC 101, User Manual

Page: 6 / 20

6
LEVITA HC-101
4.5 Tips & tricks
4.5.1 General
• The person whose hair you want to cut should sit in a position where the top of the
head is at your eye level.
• The hair should be clean, well combed, tangle-free and dry.
• Ensure you have a firm, but relaxed grip on the clipper.
• Start clipping at the highest setting and reduce the hair length in small steps until
you reach the desired hair length.
• If a lot of hair has accumulated in the comb, remove the comb attachment and
blow and/or shake the hair from the comb.
• Use a slow and controlled movement. Do not force the clipper through the hair
faster than the clipper can cut it.
4.5.2 Clipping or trimming without distance comb
• Remove the adjustable comb .
• Move the cutting system only in a parallel position to the skin.
• Slowly and carefully move the appliance against the direction of hair growth.
• Only when trimming contours should the cutting system be positioned vertically.
• Make sure you do not tilt the appliance while it is touching the skin.
• Avoid intense movements while cutting.
5 Maintenance
5.1 Cleaning
Clean the appliance every time you have used it.
The design of this model and the materials it is made of, allows you to wash the tip of the
unit, consisted of cutting blades and combs, under the jet of water.
Make sure the appliance is switched off and disconnected from the mains when
you start cleaning it.
Do not use abrasives, scourers or liquids such as alcohol, petrol or acetone to
clean the appliance.
Do not immerse the unit completely under water. This will damage the unit.
• Hold the unit with the blades downwards.
• Rinse the blades and comb under the water jet.
• Dry the tip of the unit with a soft cloth.
The body of the unit and the adapter may only be cleaned
with the brush supplied.