• Attach the supplied ADS-B antenna.
• Find a location that will allow your iLevil SW 3 to have a clear view of the sky, for
satellite reception, and “line of sight” to ADS-B ground stations and other aircraft around you.
• Align the airplane icon on the iLevil’s top label with the roll axis of your aircraft.
• ON/OFF switch should face the back of the aircraft.
• Solar cells facing up.
• Install iLevil on a surface that is LEVEL with the horizon DURING un-accelerated, straight and level flight.
It’s ok if it isn’t level on the ground (i.e. in tail draggers).
NOTE: An optional RAM suction cup mount is available on the website with swivel base for ease of installation.
• You may use our free AHRS App available on the AppStore, or any other
compatible App with a horizon display to assist you with leveling the instrument
• For optimal magnetic heading, install iLevil as far away from ferrous metals as possible. (i.e. magnetic
compass, cell phones, steel airframe)
• Turn on by flipping the ON/OFF switch. GPS and ADS-B LED will light
NOTE: DO NOT rely on the iLevil for attitude & heading if it was not aligned as specified above.
Alignment
