4
Slope mode/Flagpole lock mode
The device will measure the angle of incline/decline, then calculate and display the slope-adjusted distance. In the slope mode, press
the POWER/MEASURE button. The angle, distance value, and trajectory correction will be displayed (Fig. 3a, 3b).
Figure 3a
Figure 3b
Flagpole lock.
In the slope mode, press and hold the POWER/MEASURE button, then move the device slightly left and right until the
distance to the flagpole is locked and displayed on the LCD (Fig. 4). After locking a flagpole, the device will vibrate.
Figure 4
Horizontal distance mode
In horizontal distance mode, you can measure the horizontal distance between two points. You can use single measurement or
continuous measurement (Fig. 5).
Figure 5
Height distance mode
In height distance mode, you can measure the vertical distance between two points. You can use single measurement or continuous
measurement (Fig. 6).
Figure 6
Speed mode
In speed measurement mode, point the reticle at a moving target, and then press the POWER/MEASURE button. Do not let the
moving object out of your field of view in order to display the indication (Fig. 7).
Figure 7
