LevelOne WGR-8032, Quick Installation Manual

Page: 18 / 37

- 14 –
Hardware Installation
* Actual housing may vary depending on model.
* Actual ANTENNA may vary depending on model.
Step 1. Connect the Ethernet cable to WAN Port
Connect the RJ45 Ethernet cable from your xDSL/Cable Modem's
Ethernet port to Router's
WAN Port.
Step 2. Connect the Ethernet cable to LAN Port
Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port
to any of the Router's
LAN Ports.
Step 3. Attach the power connector
Connect the power adapter to the power inlet “POWER” of the 802.11ac
WLAN Router and turn the power switch “ON/OFF SWITCH” of your
Router on. (Figure 4)
Software Installation
To login to the Router, please perform the following steps:
1. Check Your Network Settings to login web UI.
Please make sure your PC can get IP address automatically, so the router
can communicate with your PC during configuration.
Ÿ Select “Control Panel” > “Network Connections”.
Ÿ Right click the “Local Area Connection” and choose “Properties”.
Ÿ Select the TCP/IP protocol for your network card.
Ÿ Click on the Properties button. You should then see the following screen
and make sure you have selected “Obtain IP address automatically”.
(Figure 5)
2. Launch a Web browser (Microsoft Internet Explorer 11 for example), enter
the Router, default LAN IP address 192.168.1.1 in the address bar, and
then press Enter, as shown in the following picture.
(Figure 6)
3. Then enter the default user name of admin and password of admin in the
User Name and Password fields, click “OK” to access the AP’s Web GUI.
(Figure 7)
4. From the head menu, click on SETUP . (Figure 8)
5. Click on Gateway and then click on Next .. (Figure 9-1,9-2)
WAN Interface Setup
DHCP
From the WAN Access Type drop-down list, select DHCP Client setting.
If you are happy with your settings, click on Next . (Figure 10)
English