7
Installation
1.
Connect your ADSL activated Telephone line to WBR-6603’s
RJ11 port. (Figure 1-1)
2.
Connect the Computer LAN cable. (Figure 1-1)
3.
Plug in the Power Adapter. (Figure 1-1)
4.
Wait until the Status light is blinking steadily.
This means the router is ready for use. (Figure 1-2)
5.
Installation is now complete. You can now begin to set up the
device.
Setup
1. Start your WEB browser (Internet Explorer recommended).
In the Address box, enter the address: http://192.168.1.1
(
Figure 2-1
)
2. When prompted, use the password “admin”.
(
Figure 2-2
)
3. The first time you connect to the WBR-6603, you should run
the Setup Wizard to configure the Internet Connection.
(
Figure 2-3
)
Select Wizard and click Enter.
4. This wizard will guide you through the setup in 5 easy steps.
Note: For effective wireless security, LevelOne recommends
WPA2 encryption methods.
