8
CONFIGURING YOUR LevelOne WAP -0002
The web-based configuration menu provides user friendly graphic design for easy
configuration. Please go through the following check list before you consider using
the configuration menu.
1.
You will need a JavaScript enabled web browser such as Internet Explorer v5.5
or higher and Netscape v4.0 or higher.
2.
The Ethernet network adapter must be working properly. Please refer to
Troubleshooting section for details.
3.
If you are connecting the Access Point through a router or a local area network,
which has DHCP server enabled, you will not need to assign a static IP address
to the computer that you are using to configure the Access Point. P lease go to
check item no. 6
4.
If you are not connecting the Access Point through a router or a local area
network, which has DHCP server enabled, you will need to assign a static IP
address to the computer that you are using to configure the Access Point.
5.
The IP address assigned to the computer that you are using to configure the
Access Point must be in the same IP address range as Access Point’s. Please
refer to Networking Basis section to learn more about assigning IP address.
6.
The power jack must be properly inserted to make sure that the Access Point is
powered.
The Default Settings of the 22Mbps Access Point:
IP Address
192.168.1.1
User Name
admin
Password
admin
ESSID
wireless
Channel
6
WEP
disabled
