3.
Turn on all your network devices and then check to see if the LEDs on the AP
display normally as the diagram below describes.
2. Login and Quick Setup
A dialog box will prompt you for the
User name
and
Password
. Enter
the default values and click
OK
.
The web management page will
display after your successful login.
Note
If the LEDs display abnormally, please check to see if all the cable
connectors (power adapter and Ethernet cable) are well connected to your
devices.
Solid light
Solid light or flashing
Click
Quick Setup
Open your web browser and type in
http://192.168.1.1
bar and then press
Enter
User name:
admin
Password:
admin
Click
OK
Solid light
Summary of Contents for WAB-6121
