34
5 Set Up the HyperTerminal with Serial Port
Make sure that HyperTerminal is installed in your system. If not, please go to
Start, Settings, and Control Panel. Double click Add/Remove Programs,
choose Windows Setup page, Communications, click Details button and
enable HyperTerminal to install the program to your Windows system.
Go to Start, Settings, Control Panel, double click System, and click on Device
Manager. Check which COM port is located by USB to serial port. (Ref.
Fig.11)
Fig.11
If you have setup HyperTerminal before, please go to Start, Programs,
Accessories, Communications, HyperTerminal. Click File and choose
Properties. The Properties dialog page will appear on your screen. If it is your
first time to setup HyperTerminal, you will see the following page during the
setup procedure. (Ref. Fig.12)
