150
Managed Switch - GSW-2693
Login: admin
Password:
GSW-2693# ?
802.1X Enter into 802.1X mode
account Enter into account mode
alarm Enter into alarm mode
autologout Change autologout time
bandwidth Enter into bandwidth mode
config-file Enter into config file mode
dhcp-boot Enter into dhcp-boot mode
diag Enter into diag mode
firmware Enter into firmware mode
gvrp Enter into gvrp mode
hostname Change hostname
igmp-snooping Enter into igmp mode
ip Enter into ip mode
log Enter into log mode
loop-detection Enter into Loop-Detection(LD) mode
mac-table Enter into mac table mode
management Enter into management mode
poe Enter into PoE function
port Enter into port mode
qos Enter into qos mode
reboot Reboot the system
security Enter into security mode
snmp Enter into snmp mode
stp Enter into stp mode
system Enter into system mode
tftp Enter into tftp mode
time Enter into time mode
trunk Enter into trunk mode
vlan Enter into vlan mode
vs Enter into virtual stack mode
------------<< Global commands >>------------
end Back to the top mode
exit Back to the previous mode
help Show available commands
history Show a list of previously run commands
logout Logout the system
restore Restore default or user config
save Save as start or user config
Fig. 4-3
