background image

 

 

Overiew 

POH-1620

  is  one  16  port  PoE  injector,  strictly  conforms  IEEE802.3af,  IEEE802.3at 

standard,  its  single  port  supports  30  watts  maximum  power.  This  PoE  injector  can 

coordinate the applications of traditional network system/security product/LED light. It 

transmits signal and electric power to terminal devices by using CAT5 or CAT6 cables

and then make the traditional wiring more simple, convenient, safe and reliable. 

 

 

 

PoE midspan network remote power supply, is one remote power supply for user 

developed by 

Levelone

.  It

s  indoor used  and can  work  properly  between 

input  voltage  100VAC-160VAC.  The  power  supply  is  connected  with  network 

equipment  (like  as  IAD  or  WLAN)  through  CAT5.  There  are  two  mode  option 

 

100Mbps and 1000Mbps. 

Main Features   

 

Complies with IEEE802.3af,IEEE802.3at standard; 

 

Up to maximum output voltage 30 watts; 

 

Auto-detection for IEEE802.3af/at receiving end; 

 

Support 10/100/1000 Base-T application; 

 

Power light, PoE output light; 

 

Maximum transmission distance 100m; 

 

Inserted AC/DC power-no need external power source; 

 

Certificated by CE

FCC

ROSH. 

16 Port Gigabit POE Injector 

 

w w w . l e v e l 1 . c o m

POH-1620

Summary of Contents for POH-1620

Page 1: ... is one remote power supply for user developed by Levelone It s indoor used and can work properly between input voltage 100VAC 160VAC The power supply is connected with network equipment like as IAD or WLAN through CAT5 There are two mode option 100Mbps and 1000Mbps Main Features Complies with IEEE802 3af IEEE802 3at standard Up to maximum output voltage 30 watts Auto detection for IEEE802 3af at ...

Page 2: ...ecifications Model POH 1620 Data and Technical Item Interface 16 10 100 1000Mbps Data in 16 10 100 1000Mbps PoE out Transmission rate 10 100 1000Mbps Output voltage 52VDC PoE power 400W PoE Power Pin 1 2 3 6 w w w l e v e l 1 c o m ...

Page 3: ...hen installing Attention 4 Attend if the AC input voltage is between 100VAC 160VAC Attention 5 During installation avoid any damage caused by collision and friction with other equipment PoE working mode Auto detection of receiving end Auto management of power AC input voltage AC 100 160V 50 to 60Hz Power supply Built in 400W LED indicator Power light PoE output light Connector Isolation RJ 45 EIA ...

Page 4: ...el indicates Daily Maintenance PoE midspan remote power supply provide continuous working To get reliable power supply must do daily maintenance to get best working status of power system 1 Clean up timely avoid dust accumulation 2 Check connection of input output and replace if there is damage w w w l e v e l 1 c o m Boot Testing 1 Use multimeter resistance gear to detect AC input should be no sh...

Reviews: