Figure 3: LevelOne PLI-2020 - Security Tab
8. Enter the desired
Network Name
in the field provided and click
Set Local Device Only
or
Set All Devices
to save this value
to the HomePlug Adapter
z
All HomePlug devices must use the same
Network Name
,
or they will not be able to communicate with each other.
z
On this screen, you can also click
Use Default
to use the
HomePlug Adapter's default
Network Name
.
9. Click Close to exit the
LevelOne PLI-2020
utility.
Setup is now complete.
If your PC is not the device you wish to use with the HomePlug
Adapter, connect the Ethernet cable from the HomePlug
Adapter to the desired device.
