7
PC Port Connection
The PC port connector is HDDB-15 pin type. Plug the HDDB-15 end of the KVM cable
(HDDB-15 to VGA+PS/2+USB type) into PC port on the rear of KVM switch unit.
(ACC-2101/ACC-2102/ACC-2103).
(a) For PS/2 computers - Plug the PS/2 connector into the PS/2
mouse port of PC. And to use the USB to PS2 adaptor to convert the USB connector into
PS/2 interface, then connect it to the keyboard port of PC.
(b) For USB computers - Plug the USB connector into the USB port of PC and no need to
connect the PS/2 connector to the PC.
Double Check
Double-check all of the connections. You can check the color of keyboard and mouse
connector to make sure the keyboard and mouse connectors are plugged to the correct
ports.
Power On
Attach the power supply to the KVM unit and plug the other end into a receptacle. The Port
1 LED will be lit up, and you will hear a beep. Please switch on your monitor.
Summary of Contents for KCM-0831
Page 4: ...iv...
Page 14: ...10 BANK 1 PCs BANK 2 PCs BANK 3 PCs BANK 8 BANK 4 PCs PCs...
