IES-0600
Power Input
T
e
rm
in
a
l
B
lo
c
k
PW1
PW2
Relay Output
Power Input
+
12 – 55VDC
–
Power Ground
+
12 – 55VDC
–
Power Ground
Relay Output
1A @ 24VDC
Page 4
IES-0600
DIP Switch
OFF
T5 (RJ45) enabled
ON
F5 (SFP) enabled
Note:
Port5 (T5 & F5) is shared combo port
RJ45 or SFP via DIP1 switch
DIP Switch
DIP1
DIP1
T5 (RJ45) enabled
1000M
F5 (SFP) enabled
100M
Port5 (T5 & F5) is shared combo port, enable either
RJ45 or SFP via DIP1 switch
Page 5
DIP1
1000M
100M
, enable either
IES-0600
DIN Rail Mount
•
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
surface until it audibly snaps into place
•
Start-up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
•
Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail.
DIN Rail Mount
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
surface until it audibly snaps into place
up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail.
Page 6
Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
up: Connect the supply voltage to start up the switch
Dismantling: Pull out the lower edge and then remove the
IES-0600
10/100/1000Base
The following lists the
Pin
10/100 DC & Data
1
Rx + DC +
2
Rx -
3
Tx + DC
4
unused
5
unused
6
Tx -
7
unused
8
unused
10/100/1000Base-TX Pin
The following lists the pin-out of 10/100/1000Base-
10/100 DC & Data
1000 DC & Bi
Rx + DC +
TxRx A + DC +
DC +
TxRx A -
x + DC -
TxRx B + DC
TxRx C +
TxRx C -
DC -
TxRx B -
TxRx D +
TxRx D -
Page 7
TX Pin
-TX ports
DC & Bi-Data
TxRx A + DC +
DC +
TxRx B + DC -
DC -
