Layer 3 Forward and ARP Configuration
Chapter 1 Layer 3 Management Configuration
http://www.level1.com
1-7
1.3.3 Static Route Configuration Task List
1. Static route configuration
1. Static route configuration
Command
Explanation
Global mode
ip
route
{<
ip-prefix
>
<
mask
>
|
<
ip-prefix
>/<
prefix-length
>} {<
gateway-address
>
| <
gateway-interface
>} [<
distance
>]
no
ip
route
{
<ip-prefix>
<mask>
|
<ip-prefix
>
/<prefix-length>
} [
<gateway-address>
|
<gateway-interface>
] [
<distance>
]
Set static routing; the
no ip
route {
<ip-prefix>
<mask>
|
<ip-prefix
>
/<prefix-length>
}
[
<gateway-address>
|
<gateway-interface>
]
[
<distance>
]
command
deletes a static route entry
1.3.4 Static Route Configuration Examples
The figure shown below is a simple network consisting of three layer3 switches, the
network mask for all switches and PC is 255.255.255.0. PC-A and PC-C are connected
via the static route set in SwtichA and SwitchC; PC3 and PC-B are connected via the
static route set in SwtichC to SwitchB; PC-B and PC-C is connected via the default route
set in SwitchB.
Fig 1-1 Static Route Configurations
Configuration steps:
Configuration of layer3 SwitchA
SwitchB
PC-A:10.1.1.2
PC-B:10.1.4.2
vlan3:10.1.5.1
vlan1:10.1.1.1
vlan2:10.1..2.1
vlan2:10.1.4.1
vlan2:10.1.2.2
vlan1:10.1.3.2
SwitchA
SwitchC
vlan1:10.1.3.1
PC-C:10.1.5.2
