LevelOne GSW-2476, User Manual

Page: 51 / 108

W
EB
C
ONFIGURATION
5-7
• Speed/Duplex Status – Shows the current speed and duplex mode.
• 10hdx : 10 Mbps half duplex.
• 10fdx : 10 Mbps full duplex.
• 100hdx : 100 Mbps half duplex.
• 100fdx : 100 Mbps full duplex.
• 1000fdx : 1000 Mbps full duplex.
• Flow Control Status – Indicates whether flow control is enabled or
disabled. (IEEE 802.3x, or Back-Pressure)
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Frame Type – Either “Tagged” or “All.” “Tagged” means that the port
will only send and receive VLAN-tagged packets. When set to “All,” the
port will also send and receive untagged packets.
• PVID – The VLAN ID assigned to untagged frames received on the
interface. (Default: 1)
Trunk Information
• Trunk – The trunk label. “T1” through “T8” are used as trunk labels.
• Type – All trunks and ports on this switch are 10/100/1000Mbps
• Trunk Status – Indicates the speed and duplex setting of the trunk. This
can be changed on the TRUNKS > Settings page.
•
10hdx : 10 Mbps half duplex.
• 10fdx : 10 Mbps full duplex.
• 100hdx : 100 Mbps half duplex.
• 100fdx : 100 Mbps full duplex.
• 1000fdx : 1000 Mbps full duplex.
• Ports – The ports that are members of the trunk.
VLAN Inoformation
• VLAN ID – A number in the range 1 - 4095 which identifies the VLAN.
• VLAN Member – A list of the ports that are members of the VLAN.
By default, all ports are members of VLAN 1.