12
6
SMART FUNCTION CONFIGURATION
6.1 HyperTerminal
The Switch has a smart function that you can use to manage your local area network (LAN) more
effectively. You can also use the default setting to operate the Switch as a dumb switch.
If you want to use smart function, install the Switch as below:
Use the “RS-232” connector to connect the Switch to a computer. Connect one (1) cable end to
the Switch, and connect the other end to the computer’s “COM1” or “COM2” port.
Note:
If your Windows program doesn’t have a hyper terminal, you have to install it first.
Power “ON” the Switch
Execute the “HyperTerminal” program:
Start Menu
Æ
Application Program
Æ
Communication
Æ
Hyper Terminal
Setup the connection content of Hyper Terminal:
In connection tag, select which “COM” port is used to connect PC and the Switch.
Then press the “SETUP” button, set “Bits per second” to
9600
, “Data bits” to
8
, “Parity” to
None
, “Stop bits” to
1
, “Flow control” to
None
.
Item Setting
Port COM
Baud rate
9600
Data bits
8 bits
Parity None
Stop bits
1
Flow control
NA
