Chapter 6
Network parameters
http://www.level1.com
Page 32
Figure 6_14 Configuration of DHCP service
Enable DHCP server: Used to disable or enable the device's DHCP server function. Selecting
it means allow.
Start and end IP address: The IP address fields the DHCP server assigns to the network
computer automatically (which should be on the same network segment as the IP address of
the device LAN port).
Subnet mask: The subnet mask automatically assigned by the DHCP server to the network
computer (which should be consistent with that of the LAN port of the device).
Gateway address: The gateway IP address the DHCP server automatically assigns to the
network computer (which should be consistent with the LAN IP address of the device).
Leasing time: The leasing time for the network computers to obtain the IP address assigned
by the device (Unit: Seconds).
Primary DHCP server: The IP address of the primary DNS server automatically assigned by
the DHCP server to the network computers.
Secondary DNS server: The IP address of the secondary DNS server assigned by the DHCP
server to the network computers automatically.
Enable DNS proxy: Selecting it means enabled. The DNS proxy function of the device will
not take effect unless enabled. After enabling this function, the gateway address is assigned to
Summary of Contents for GBR-4001
Page 191: ...http www level1 com Page 186...
