16
the counters. Click
Cancel button will bring the screen back to previous
page.
Port Counter Information Interface
Port Configuration
You can configure speed, status, flow control, duplex mode, port base priority,
port priority mapping and back pressure of each port. After configuration,
click
Apply
button to apply the new configuration.
Advertise 10M Half:
when auto negotiation is enabling, you can set up
the port speed is “On” or “Off”.
Advertise 10M Full:
when auto negotiation is enabling, you can set up
the port speed is “On” or “Off”.
Advertise 100M Half:
when auto negotiation is enabling, you can set up
the port speed is “On” or “Off”.
Advertise 100M Full:
when auto negotiation is enabling, you can set up
the port speed is “On” or “Off”.
Full Duplex Flow Control:
when auto negotiation is enabling, you can
set up the full duplex flow control status is “On” or “Off”.
Auto Negotiation:
set up the auto negotiation status. “
Enable
” means
the port speed is auto negotiation and detect. The port speed has four
modes and can be configured at the same time. “
Disable
” means the
auto negotiation is in force status. You can configure the port speed in