LevelOne FSW-0802TX, User Manual

Page: 35 / 47

Mini Console
3-19
If a User
’
s Password has been set and enabled, the unit does not allow
changing system settings, such as port settings and unit configuration, unless
the correct password is keyed in thereby unlocking the Mini-Console.
Unlock the Console
Once the console is locked, a password will be asked when the menu item
UNIT CONFIG is selected.
In the password session, a message “* * * *_ _ _ _ PSW” will be shown. You
have to key in the correct password to enter the submenu. The regular
Password assigned by you and the Back door Password are accepted. The
first four asterisks are used for normal password while the others are used for
Back door Password. The regular password is assigned by the user and the
Back door Password depends on the Key Code. See “Back Door Password”
on page 3-20 for more information.
After the password session is passed, you can go to the sub menu of UNIT
CONFIG. The lock sign on the Mini-Console is OFF and you are free to
configure any settings.
Secure the Switch
Two passwords are provided to protect the device from being accessed
anyone other than administrator. Further information regarding Password and
Back door Password, please refer to “Unlock the Console” section.
Set Password
You can configure a password by enter a 4 digit password using the numbers
from 0~9. The default is “0000”.
To set the password:
<UNIT CONFIG><SET PASSWORD> enter 4 digits.