Security Page
This is the page where you configure Security settings of your LevelOne WMC-0300
54Mbps wireless PCI Adapter.
Encryption:
Select
Enable
or
Disable
data encryption feature.
Aut. Mode:
There are three modes available to choose from.
Open Authentication
– the sender and receiver do not share secret Key
for communication. Instead, each party generates its own key-pairs and
ask the other party to accept it. The key is regenerated when the
connection is established every time.
Shared Authentication
– the sender and receiver shares the common
key for data communication, and the key is used for extended length of
time.
Auto
– depend on the communication to establish, and automatically use
the proper authentication mode.
The following will only be activated to allow for configuration when
Encryption
is
enabled.
Default Key:
select one of the 4 keys to use.
Network Key
: enter values to these fields, either in HEX or ASCII formats. You only
have to enter the key that you will use
Key Length
: select 64 or 128 bits as the length of the keys
Key Format:
ASCII
or
HEX
(Please refer to Appendix G: Glossary for details about
these two formats).
16
